KB526: DS54 Address Programming

This article was last updated on Aug. 20, 2011, 7:26 p.m. | Print Article | Leave Feedback

Q:  What is the procedure for programming the DS54 Address using the Programming Address Button?

A:  The procedure for programming the DS54 address using the Address Programming Button is simple.

This procedure only requires the determination of the turnout addresses block for the DS54.

During the programming cycle the activation of any turnout address within the desired turnout address block will automatically set the DS54 to the proper module address.

 

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.