KB525: DS54 - Two Button Turnout Application

This article was last updated on Aug. 20, 2011, 7:29 p.m. | Print Article | Leave Feedback

Q:  Can I set up the DS54 for two-button operation turnout control?

A:  Two-button control (one button for setting the points to the main route and the other button for setting the points to the diverging route) is a standard configuration for the control of any turnout.

 
The following charts indicate operating criteria and CV settings.

 

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.