KB433: DT400 - EMERGENCY Stop

This article was last updated on Jan. 20, 2012, 3:29 p.m. | Print Article | Leave Feedback

If the layout starts to “get away” on you, either PRESS the PWR Key followed by the N- Key or, turn the track power to “SLEEP” on the command station.

Either way, the layout will stop to give you a chance to regain your composure.

To resume operations where you left off, press the PWR Key followed by the Y+ Key

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.