KB267: Super Empire Builder- DB150 Beeps 5 Times

This article was last updated on Jan. 16, 2012, 12:53 p.m. | Print Article | Leave Feedback

If the DB150 beeps 5 times and shuts down briefly and then comes back on again.

It is probably being run too close to its pre-set current limit.

To solve this problem, reduce the track current load by setting up additional power districts to provide more total power for the layout.

In this case excess current consumption may clip or mutilate some outgoing packets to keep the track current within acceptable limits.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.