KB1012: Resetting your WTL12 to a Command Station

This article was last updated on Nov. 15, 2012, 9:54 a.m. | Print Article | Leave Feedback

In order to reset your WTL12 to the factory default setting as a Command Station/Throttle simply follow the steps below:

  1. Disconnect the power from the WTL12 unit
  2. Press and Hold the PWR key
  3. Reconnect the power while continuing to hold the PWR key
  4. Release the PWR key
  5. The WTL12 is now configured as a Command Station/Throttle.  The power button will be lit up green on the right side.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.