RX4 4-Zone Transponding Receiver Add-on for BDL Series Detectors
The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems. The RX4 enables you to not only see what blocks are occupied but also identifies what is there.
Know the layout zone location of transponder-equipped locos and rolling rolling stock
Each RX4 handles 4 transponding zones
Low current pulses wont interfere with DCC decoders or other track signals
Can be used in conjunction with other means of occupancy detection to customize your layout's feedback system
Works with most DCC compatible systems
Can be adapted to work with other command control systems as well
Location and identification information is updated continuously on LocoNet
Location Information can be configured to be displayed on a track diagram
No modification of existing equipment required, just add the transponding components and you're ready to go.
More features than any other method of "bi-directional" communication.
Note: RX4s must be used in conjunction with a Digitrax BDL16 series occupancy detector to function.
- For Use With
- BDL168, BDL162, BDL16
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.