TF4 Quad DCC Function Decoder with Integrated Transponder

TF4 Quad DCC Function Decoder with Integrated Transponder

  • Four 125mA (250mA peak) function output for lights or other functions

  • Functions can be turned on/off using F0-F12

  • Supports both 2 digit and 4 digit addressing

  • Programmable from DCC compatible equipment

  • Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc. on the yellow and white leads

  • Standard On/Off Function operation available on green & violet leads.

  • Compatible with Digitrax DCC Transponding Systems

  • Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)

Specifications

Size
0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)
Installation
Wired (read more)

Decoders with wires provided for hooking up the decoder in the locomotive.  If wires are not provided for hooking up functions, solder pads are provided to allow you to access those functions by adding wires. 

Digitrax Mobile Decoder Wire Colors

What the wires are for

Wire Color

Power Pick-up Right   (Engineer's Side)

Red

Power Pick-up Left   (Fireman's Side)

Black

Motor + Right Brush

Orange

Motor – Left Brush

Gray

F0(Fwd)-Forward Light

White

F0(Rev)-Reverse Light

Yellow

Lamp Common

Blue

F1-Function 1

Green

F2-Function 2

Violet

F3-Function 3

Brown

F4-Function 4

White w/ Yellow   Stripe

F5-Function 5

White w/ Green Stripe

F6-Function 6

White w/ Blue Stripe

Note: DH82 & DN92 decoders, some of the very first decoders produced by Digitrax used a different wiring color code.  Please check decoder spec sheets for the wire colors that were used with these decoders.

Original Release Date
06-15-2002
Warranty
No Worries Warranty (read more)

 

Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage

on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.

That's it! A simple, straightforward warranty with no tricky language!


Repairs are simple, too!  Just fill out the form and return your items directly to Digitrax for repair.  We'll get them fixed up and return them to you as quickly as possible.  Please DO NOT return items for repair to the place of purchase.

Make Sure Your Item Needs To Be Repaired Before Sending It To Us!  Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.

1.  Check the Tech Support Depot for help.  Search for troubleshooting guides.

2.  Click here to send Digitrax Tech Support a message.

Please give your name, e-mail address, phone number and when is the best time to contact you.  Please give a complete description of the issue you are having.

Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.

Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.

Please Note:  Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service.  Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals).  Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires. 

Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship.  This includes speakers, wire, cables, battery covers, etc.

Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty. 

Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.

Product Support

Tech Support Depot